Features
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable parameter.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
Parameter
MODEL
RBL-10A
RBL-20A
RBL-30A
RBL-40A
RBL-50A
RBL-60A
Battery Voltage
12V 24V Auto
Charging Current
10A
20A
30A
40A
50A
60A
Discharging Current
10A
10A
10A
20A
30A
30A
Max Solar input
48V(for 24V battery) 24V(for 12V battery)
Equalization
14.4V(Sealed) 14.2V(Gel) 14.6V(Flood)
Float charge
13.7V(defaul,adjustable)
Discharge stop
10.7V(defaul,adjustable)
Discharge reconnect
12.6V(defaul,adjustable)
Charge reconnect
13V
Voltage of open light
Solar Panel8V(Light lights delay)
Voltage of close light
Solar Panel8V(Light off delay)
USB output
5V/3A
Self-consume
<10mA
Operating temperature
-35°C~+60°C
Size
133.5*70*35mm
188*90*47mm
*all red color voltage X2 ,while using 24V system.
Connection
1.Connect the battery to the charge regulator – plus and minus.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
Emergency Announcement:
At present, some sellers like E***N,they sell the similar 40A 50A 60A controllers with very low price,but their
fake 40A 50A 60A are very light and have no heat dissipating teeth on the bottom.they are not real 40A 50A
60A.You can do the test if you already bought them ! Please don’t buy their cheaper controllers to save money
If you don’t believe it, you can buy our controllers and their controllers for comparison!
Warranty & Refund
1.Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received.
2.Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materils.
3.Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective.In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.
4.If the item is found non-defective, the item will be sent back to the buyer at buyer’s expense.
window.adminAccountId=2674872182;
