Features:
1. Adopting industrial-grade main control chip, built-in RTC circuit to provide high-precision clock setting
2. Equipped with large LCD displaying charging current, battery voltage, load current and system time.
3.Support PWM charge management, optimize charging efficiency and battery life.
4. Provide dual USB ports with maximum output current of 2A to meet the charging needs of multiple devices.
5. Upgrade two groups of independent timer can be set, free to set the load output time 6. Support infrared remote control can be remotely switched on and off the load, more convenient to useParameter:
Rated voltage: 12/24V
Rated charging current: 30A/40A/100A
Rated discharge current: 10A
USB output voltage: 5V
USB/TYPE-C output current: <2A
Overload and short-circuit protection: 1.5 times of the rated current
Short circuit recovery time: 10S
Maximum charging voltage of solar panel: 12V battery (18V-25V)/24V battery (36V/50V)
Operating temperature: -35℃-55℃
Precautions:
1. The product is only applicable to 12V and 24V lead-acid batteries
2. The wires between the controller and the battery should be as short as possible, and the current of the wires used should be greater than the output current of the battery.
3. Only applicable to solar energy as a charging source, prohibit the use of other power sources
4. The controller will generate heat when running, need to be installed in a ventilated location.
5. The product is not waterproof
6. When using DC-5mm socket charging polarity is inside positive and outside negative.
7. When using the DC-5mm socket for the load output for the internal positive and external negative
8. Installation steps first connected to the battery, display normal and then connected to the load, and finally connected to the solar energy, the polarity can not be reversed!
9. Solar panel power requirements: 12V battery power below 360W, 24V battery solar panel power below 720W
Package include:
Solar controller *1
window.adminAccountId=236982879;
