Product Description
Q1:I use the remote control to test the light, why does the light go off after flashing?
A1:Because the lights cannot be turned on during the day. You need to cover the solar panel with a black cloth, or something, for the light to come on.
Q2: What are the advantages of TENKOO solar street light?
A2: Compared with others, TENKOO outdoor solar street light is designed with 220 degrees super wide-angle lighting angle and solar panel and lamp 2 in 1, made of 21% high conversion rate solar panel and 216pcs ultra-bright LED beads, 1 pc TENKOO highlight LED beads ＝10 pcs other LED beads. Equipped with a 8000mAh large capacity battery, which can provide longer-lasting light and wider range lighting area.
Q3: What is the coverage area of outdoor street lights?
A3: We recommend that the installation height of the solar street lights outdoor is 8.2ft-11.5ft. The illumination coverage is up to 805sq.ft.
Q4: Can I use the solar street lights outdoor dusk to dawn in bad weather like heavy rain?
A4: Yes, the led parking lot light is ip66 waterproof grade. The solar panel and the lamp body adopt an integrated design. No worries about rain, it can work in high temperatures or cold weather -68℉~148℉.
Q5: Can I adjust the brightness of the solar security led lights?
A5: Yes, there are 4 levels of brightness that can be adjusted by the remote control. 20%/40%/60%/80%/100% brightness for choosing.
Q6: Does the package will come with a pole to install the solar parking lot lights on the ground?
A6: Hello, the package you received did not include a pole, but included an 20inch long mounting arm. If you want a pole mounting, you need to buy a metal pole, the diameter of the pole is between 1in-3in.
Q7: How far is the remote control distance of the solar motion lights?
A7: The remote control distance range is up to 16ft.
Q8: What is the sensor distance range of the solar motion sensor light?
A8: The sensing distance is 20ft-26ft (6m-8m). Under motion sensor mode, lighten up at dusk, 30% brightness when nobody approaches, 100% brightness when someone comes, 30% brightness when people leave.
Q9：We need it for an area light, can the motion sensor be turned off?
A9: Yes, If you don’t need the motion sensor mode, you can just press the “AUTO” button of the remote control, and in this case, the motion sensor mode is not activated.
Wall Mounting Suggested Install Steps:
1. Drill 4 holes according to the bracket arm hole location.
2. Knock the screw into the hole and loosen the screw nut.
3. Fix the bracket arm with screws and nuts.
4. Install the light on the bracket.
Specifications:
Power of Solar Street Light: 300W
Battery: 3.2V/8000mAh
LED: 216pcs
LED Beads Type: Super bright LED beads
Lighting Angle: 220 degrees super wide-angle lighting
Color Temperature: 6500K/Cool White
Waterproof Rate: IP66
Material: Aluminum Alloy, Glass
Operating Temperature: -68℉~148℉
Power Switch
Please confirm the switch has been opened before use, if the switch isn‘t open, it is unable to charge and use the remote control.
Remote Control Function Introduction
It has a memory function. After turn off the light, then turn on the light again it will default the brightness and working mode before.
1. After turn on through the remote control, the lights will automatically turn on at dusk and turn off at dawn. You can also be turned off by the remote control “off” button.
2. You can change the brightness by “-“, “+” on the remote control, you can also choose the lighting time and lighting mode.
3. If the working mode you choose is “2H”, the radar sensing function will be turned off and the light will stay on constant brightness within 2 hours. After 2 hours later the radar sensing function will turn on again.
4. After you press “Radar” ,the light will turn on the motion sensor mode. Object movement detected, 100% brightness. No object movement detected, 30% brightness.
5. If you press “AUTO”, the light will default dusk to dawn, or until the battery runs out.
6.In any lighting mode, it all can adjust the brightness.
TENKOO Tips:
- 1.Firstly put the AAA battery into the remote control. The control distance of remote is 16ft(5m).
- 2.Before using the remote control, please ensure that the switch on the lamp is opened.
- 3.Before installation to test whether the light can work normally.
- 4.Regularly clean the solar panel to prolong the service life.
