MPPT Battery Charge Controller 120A 12V/24V/48V For Solar System
MPPT solar PV controller (Maximum power point tracking)for solar charging solutions. 120A charge current, fixed for 12V/24V/48V
Products Feature:
1. Battery temperature sensor (BTS) automatically provides
temperature compensation
2. Automatic battery voltage detection
3. Support wide range of lead-acid batteries including wet,
AGM and gel batteries
4. Integrated intelligent slot compatible with SNMP/MODBUS communication
₦218,000.00 ₦228,000.00
Data Sheet
| Model | SCCM4548 | ||||
| Maximum Solar input Voltage | 145V | ||||
| Nominal System Voltage | 12,24,48VDC(Auto detection) | ||||
| Maximum Battery Current | 120A | ||||
| DC Array MPPT Volage Range | 12VDC/24VDC/48VDC | ||||
| PV Array MPPT Volage Range | 15-115VDC/30-115VDC-60-115VDC | ||||
| Maxinmum input Power | 12Volt-625Watts | ||||
| 24Volt-1250Watts | |||||
| 48Volt-2500Watts | |||||
| Charging Algorithm | 3-Step | ||||
| Charging stages | Bulk, Absorption, Float
Bulk, Absorption, Float |
||||
| Temperature compensation coefficient | -5mV/℃/cell(25℃ref.) -5mV/℃/cell(25℃ref.) | ||||
| Temperature compensation range | 0℃ to +50℃ 0℃ to +50℃ | ||||
| Temperature compensated set points | Absorption,Float Absorption,Float | ||||
| Charging Set points | Absorption Stage Absorption Stage Float Stage | ||||
| Flooded Battery | 14.6V/29.2V/58.4V 14.6V/29.2V/58.4V 13.5V/27V/54V | ||||
| ARG/Gel Battery（Default) | 14.1V/28.2V/56.4V 14.1V/28.2V/56.4V 13.5V/27V/54V | ||||
| Overcharge voltage | 15V/30V/60V 15V/30V/60V | ||||
| Overcharge restart voltage | 14.5V/29V/58V 14.5V/29V/58V | ||||
| Battery discharge voltage | 8.5V/17V/34V 8.5V/17V/34V | ||||
| Battery overdischarge voltage | 9V/18V/36V 9V/18V/36V | ||||
| Product size(H*W*D,mm) | 283*160*105 mm | ||||
| Product weight(Kg) | 4.0kg | ||||
| Ambient Temperature Range | 0℃ to +55℃ | ||||
| Storage Temperature | -40℃ to 75℃ | ||||
| Humidity | 0%-90%RH(No condensing) | ||||
| Enclosure | IP31(indoor&vented) | ||||
Related products
-
Other Solar Products, Solar Products
500W Off-Grid Solar Generator With Broadcasting Function
The most obvious advantage solar generators have over fuel-powered generators is that they’re the “green” eco-friendly alternative. The ability to harvest power without fuel is not only better for the environment, it also equates to no ongoing costs associated with purchasing gasoline, propane or any other fuel source. This not only saves the owner money on electricity bills in the long-term, it also provides a reliable and independent method of power generation that relies merely on sunlight and the proper functioning of its parts. When you consider the health of your gadgets — such as lights, tablets and portable appliances — the clean, uninterrupted power generated by Saroda SP10-11 should leave you feeling content.
*SP10-11 500W Off-Grid Solar Generator
*Integrated Power Box
*Controller: Build-in, 15A/12V, MPPT
*Battery: 75Ah/12V, Lead-acid (Deep cycle)
*Inverter: Build-in, 500W high frequency modified since wave inverter
*Outlet: DC outlets12V/500mA x 4, 12V/1000mA x1; AC outlets 500W 220V/50HZ x2
*USB port: 5V/750mA x 2
*Broadcasting function: USBmicroSD cardFM radio/blue-tooth
*Circuit-breaker (master switch): 230V 60A
*Fuse of the external battery input: 250V/40A x2
*Solar Panel (with 5 meter cable):
*Power: 150W 1PC
*Cell type:Monocrystalline silicon
*Number of cell: 36pcs
*Vmp: 18V
*Imp: 8.34A
*Power tolerance: ±5%
*Voc: 22.5V
*Isc: 9.20A
*Operating temperature: -40°c to 80°c
*Size: 1480*670*35mm
*Weight: 12.25kg
Other accessories
*LED Bulb: 12V/5W x4pcs
*3 meters cable with individule switch
*AC power cable: 1PC
*USB cable: 1PC with 10 in 1 output leadsSKU: n/a -
Solar Products
Submersible DC Solar Water Pump + Inbuilt Controller
Submersible DC solar water pump is designed as DC brush motor driving pump impellers, by connecting to solar panels directly. The power from solar panels can drive this pump. This type of pump is mostly used in areas, where lack of electricity or strict requirement for environmental protection. DC solar pump is suitable to pump and drainage water, which doesn’t need a controller. Moreover, the installation is very simple. This type of pump is mainly used in homes, institutions, fields of power plants, steel mills, mining, chemical, fire, water plants, agricultural irrigation, and other industries. Specifications: Voltage: 24/36volts Power: 250watts Max flow: 2(M3/h) Max head: 25m Outlet: 1” Solar Panel capacity: 250/300watts – (24volt). Battery Capacity: 24volt Free installation Cable: 20m. Higher capacities are available on request.
SKU: n/a -
Circuit Breaker, Solar Products
SMK 500V DC DOUBLE POLE BREAKER
FPV-63 DC MCB supplementary protectors are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already provided or not required. Devices are designed for direct current (DC) control circuit applications.
Specifications
FPV-63 Series Circuit Breaker FPV-63
Frame Degree Rated Current (A) 63
Pole 2P
Rated Operating Voltage (V DC) DC12V -DC1200V Rated Current In (A) 1-63A
Rated Insulation Voltage Ui (V DC) 1200VDC Rated Impact Voltage Uimp (kV) 4
Ultimate Breaking Capacity Icu (kA) 6
Run Breaking Capacity LCS (%lcu) 75% Curve Type C
Trip Type Thermal-magneticSKU: n/a -
MPPT charge controller, Solar Charge Controller, Solar Products
Felicity Charge Controller MPPT 60ah 12v/24v/36v/48v
MPPT charge controller, Solar Charge Controller, Solar ProductsFelicity Charge Controller MPPT 60ah 12v/24v/36v/48v
The Felicity 60A 12V/24V/48V MPPT Solar Charge Controller is an energy-efficient Solar Charge Controller that optimizes the charging of the Battery bank by a Solar (PV) Array. It has a peak conversion efficiency of around 98%. It offers reverse polarity protection as well as overcharging and over-discharging protection of the battery bank. The LCD screen shows Charge voltage, charge circuit, the voltage of storage battery, the capacity of the storage battery, output current enhancing the user experience.
SKU: n/a
